Join our mailing list!








Home > Engine > KTM
Sort By:
Page of 4
Billet Ignition Cover KTM 50 Gasket Billet Ignition Cover KTM 65 Gasket Billet Ignition Cover KTM 85 Gasket
The Nihilo Concepts Replacement Billet Ignition Cover Gasket. Made from top of the line gasket material for longevity and durability. The Nihilo Concepts Replacement Billet Ignition Cover Gasket. Made from top of the line gasket material for longevity and durability. The Nihilo Concepts Replacement Billet Ignition Cover Gasket. Made from top of the line gasket material for longevity and durability.
2016 KTM 65SX Power Valve Hose Heat Shield 2013-2019 Stainless Steel Clutch Bolt Kit KTM 50 Powervalve Adjustment Tool
Protect your power valve hose with high temperature low weight silicone sleeves rated to 400 degrees. The new Nihilo Concepts Clutch Bolt Kit replaces the stock bolts that have been known to strip out during removal. Nihilo Concepts had designed a billet aluminum power valve tool with a wide handle that makes is easier to turn and it fits perfectly into the square pocket on the right side of the motor.
KTM 50 Nihilo Concepts Clutch Cover Plug Nihilo Concepts Hour Meter Bracket Nihilo Concepts 1/4" x 3' Fuel Hose
Hour Meter Bracket
Our Price: $12.95
1/4" x 3' Fuel Hose
Our Price: $12.95
Replacement black plug for our KTM 50 2016 billet clutch cover. Comes with replacement copper washer The Nihilo Concepts Hour meter bracket allows you to Flush Mount your Hour Meter to any KTM motorcycle with ease Blue fuel line hose. Perfect for overflow hoses, coolant recovery tank overflow, and gas cap fuel line.
Nihilo Concepts 1/8" x 5' Fuel Hose Deck/Timing Tool KTM 50 Stainless Steel Timing/Deck Tool KTM/Husky 105 Stainless Steel
1/8" fuel line hose. Perfect for overflow hoses on any carb! Will complete overflow hoses for most models. You must have this tool to properly set the deck height, timing and power valve on your KTM if your head is not set up per factory specification you run the risk of stator failure and will have an improperly tuned motor. You must have this tool to properly set the deck height, timing and power valve on your KTM if your head is not set up per factory specification you run the risk of stator failure and will have an improperly tuned motor.
Deck/Timing Tool 60 KTM 50 Stainless Steel Timing/Deck Tool KTM 65 Stainless Steel Timing/Deck Tool KTM/Husky 85 Stainless Steel
Nihilo has developed a Stainless Steel Deck Tool that is a fraction of the cost of the OEM special tool. You must have this tool to properly set the deck height, timing and power valve on your KTM if your head is not set up per factory specification you run the risk of stator failure and will have an improperly tuned motor. You must have this tool to properly set the deck height, timing and power valve on your KTM if your head is not set up per factory specification you run the risk of stator failure and will have an improperly tuned motor.
Timing/Deck Tool KTM/Husky 250/300 Stainless Steel Timing/Deck Tool KTM/Husky 85 Stainless Steel Timing/Deck Tool KTM/Husky 125/150 Stainless Steel
You must have this tool to properly set the deck height, timing and power valve on your KTM if your head is not set up per factory specification you run the risk of stator failure and will have an improperly tuned motor. You must have this tool to properly set the deck height, timing and power valve on your KTM if your head is not set up per factory specification you run the risk of stator failure and will have an improperly tuned motor. You must have this tool to properly set the deck height and power valve on your KTM if your head is not set up per factory specification you run the risk of stator failure and will have an improperly tuned motor.
Reusable Ignition Cover Gasket KTM/HUSQVARNA 65 09-18 Ignition Cover Gasket 2018 KTM/Husky 85 KTM/Husqvarna 50 Case Saver Cover Guard
The Nihilo Concepts reusable ignition cover gasket is made with a heavy duty aluminum core and a compound rubber coating on both sides for guaranteed durability after repeated use. No more replacing gaskets every time you pull the ignition cover off! Provided superior seal to keep water out. The Nihilo Concepts reusable ignition cover gasket is made with a heavy duty aluminum core and a compound rubber coating for guaranteed durability after repeated use. The KTM/Husqvarna 50 Case Saver Cover Guard is intended to protect the front sprocket and the rider from coming in contact with one another.
Reusable Inner Clutch Cover Gasket KTM/Husqvarna 50 Reusable Inner Clutch Cover Gasket KTM/Husqvarna 65 Reusable Inner Clutch Cover Gasket KTM/Husqvarna 85
No more replacing gaskets every time you pull the clutch cover off! No more replacing gaskets every time you pull the clutch cover off! No more replacing gaskets every time you pull the clutch cover off!
Clutch Bolt Tool KTM 50 Power Valve Hose Kit KTM 65 Power Valve Hose Kit KTM 65 FMF/SXS Pipe
You must have this special tool to adjust your KTM 50 clutch The Nihilo hose kit will not let your 09-13 KTM 65’s power valve fail due to low pressure or a loose fitting hose. Power Valve Hose Kit for the KTM 65 FMF/SXS Pipe. The Nihilo hose kit will not let your 09-15 KTM 65’s power valve fail due to low pressure or a loose fitting hose.
KTM/Husqvarna 50 Heavy Duty Kickstarter Return Spring 09-18 KTM 50 SX Beveled Clutch Washer Factory Foam
FACTORY FOAM 12"x12"x1.5"
Our Price: $19.95
Replace your faulty, broken stock return spring with Nihilo Concepts Heavy Duty Kicker Return Spring. Nihilo has designed a thicker and stronger spring washer made from high quality steel that will not sack out when exposed to heat. Nihilo Factory Foam is a must have for that muddy race. It can be stuffed into all those cracks and crevices that will typically pack full with mud making you bike heavy and hard to handle. This type of foam was introduced back in the day by the factory race teams and is finally making its comeback because it really works! The worst thing is a heavy mud packed bike when you are riding in rough conditions, save your energy by eliminating pounds of mud from being trapped between your skid plate, around your shift lever and around you linkage. You can even put it on top of your helmet and visor to keep mud from building up. Simply cut with household scissors to the desired shape and zip tie on. Factory Foam can be washed and reused countless times, you will find more uses every time it rains.