Join our mailing list!








Home > KTM > 85 SX
Sort By:
Page of 4
KTM / HUSQVARNA 85 Carbon Fiber Skid Plate 2018-2019 Coolant Recovery Tank KTM/Husky 2018 Frame Grip Tape for Stock Plastic Guards
The Nihilo Concepts Carbon Fiber Skid (Glide Plate) for the 2018-2019 KTM / HUSQVARNA 85 is hand made and one of a kind made from 100% carbon fiber to be strong and light. The skid plate was molded to the bottom frame channels of the new 2018 bikes and has a billet mounting bracket at the front that holds it in place. The back of the plate is curved to fit over the bottom rear rail of the frame and then it simply snaps up into place. It basically becomes one with the frame and is very strong and rigid to withstand the abuse of top level competition. Having a Glide Plate on the bottom of your frame eliminates catching dirt when in ruts and scrubbing jumps so momentum is not lost. All Nihilo skid plates are hand made in our Florida facility to exacting standards and personally fabricated and inspected by our in house Composite specialist to assure perfect fit and finish every time. The New Nihilo Concepts Coolant Recovery tank is a must have for those who ride in slow, technical conditions, or the serious racer Nihilo Concepts Factory Frame Grip Tape is a must have for the serious racer.
KTM/Husqvarna 85 Front Sprocket Case Saver Cover Guard Reusable Inner Clutch Cover Gasket KTM/Husqvarna 85 Titanium Rear Brake Tip 2016-18 KTM & Husqvarna
The KTM/Husky 2018 85 SX Front Sprocket Case Saver Cover Guard is intended to protect the front sprocket and the rider from coming in contact with one another. No more replacing gaskets every time you pull the clutch cover off! Add some Ti style to your life
Stainless Steel Rear Brake Tip 2016-18 KTM & Husqvarna Idler Gear Reinforcement KTM/Husqvarna 85 2018 KTM/Husky 85 Crank Stuffers
Stainless Steel Rear Brake tip for the 2016 KTM and Husky bikes
While testing the new 2018- 85’s we have seen a possible issue with the Kick Start idler gear bushing boss breaking off when kick starting the bike. Nihilo has designed a new device that holds the gear in place while at the same time tightly reinforcing the boss in the center case so it can not break off. It’s easy to install and only requires removal of the outside clutch cover and clutch assembly. Once you have the clutch out of the bike you simply replace the thin metal star shaped idler gear retainer with the Nihilo part and reassemble. This small part can save you from destroying your center cases and losing the race. This part is a must have for your 2018 KTM or Husky get one today!
Finally the perfect fix for all KTM/Husky 85 owners that have burnt out their crank and are looking for a less expensive way to get back on the track while at the same time improving performance.
KTM/Husqvarna 85 Heavy Duty Clutch Pressure Plate Powervalve Adjustment Tool Radiator Hoses 2018 KTM/Husqvarna 85
Made from aircraft grade 6061 billet aluminum to the most exacting standards and assuring that the contact area of the new pressure plate is perfectly concentric Nihilo Concepts had designed a billet aluminum power valve tool with a wide handle that makes is easier to turn and it fits perfectly into the square pocket on the right side of the motor. Nihilo Concepts radiator hoses will provide your dirt bike engine with an advantage in performance and style
Seat Cover KTM/Husqvarna 85 2018 Ignition Cover Gasket 2018 KTM/Husky 85 2018 KTM/Husqvarna 85 Powervalve Cover
Look just like the top championship winning mini and pro riders with Nihilo's new ribbed and reinforced seat covers. The Nihilo Concepts reusable ignition cover gasket is made with a heavy duty aluminum core and a compound rubber coating for guaranteed durability after repeated use. The Nihilo Concepts 2018 KTM/Husky 85 Powervalve Cover is made from 6061 billet aluminum
High Volume Water Pump Kit 2018 KTM/Husky 85 Ignition Cover 2018 KTM/Husqvarna 85 2018 KTM/Husqvarna 85 Billet Clutch Cover
The new Nihilo “Efficient Flow Water Pump Kit” for the 2018 KTM/Husqvarna 85 is the answer to cooling issues on the 2018. The Nihilo Concepts Billet Ignition Cover 2018 KTM/Husqvarna 85 is made from 6061 Billet aluminum for strength and long life. The Nihilo Concepts 85 Billet Clutch Side Cover creates a tight seal against the engine cases and is thinner than the stock component leaving room for your boot
2018 KTM/Husqvarna 85 Case Saver KTM 2018 85/105 Frame Grip Tape KTM/Husqvarna 14MM Ny-Lock Nut
The 85 SX & TC have a very vulnerable clutch master cylinder that can be destroyed if the chain breaks leaving you high and dry. Nihilo Concepts Factory Frame Grip Tape is a must have for the serious racer. Nihilo Concepts self locking Ny-Lock Axle Nut, made from 6061 anodized billet aluminum, ensures that your axle nut will not vibrate loose under extreme conditions.
Titanium Rear Brake Tip KTM/Husky 09-2015 Billet Rear Brake Tip Husqvarna/KTM 2016-2017 High Flow Water Pump Impeller KTM 85cc-350cc
The Nihilo Concepts/KTM Rear Brake tip is Gnarly and Sharp The Nihilo Concepts Brake Tip is CNC machined from 6061 Billet aluminum and gives the rider positive rear brake feel and control. The Nihilo Concepts Billet Aluminum Water Pump Impeller is stronger and will last the lifetimes in your motor.
KTM/Husqvarna 85 Front Sprocket Case Saver Cover Guard GoPro Remote Handlebar Mount Clutch Line Heat Shield
The KTM 85 SX Front Sprocket Case Saver Cover Guard is intended to protect the front sprocket and the rider from coming in contact with one another. The Nihilo Concepts GoPro Remote mount puts the GoPro remote right at your fingertips next to the left grip. Protect your hydraulic clutch line with Nihilo Concepts new Clutch Line Heat Shield.
Full Billet Titanium One Piece Foot Pegs KTM/Husqvarna Seat Cover KTM/Husqvarna 85 2013-2017 Husqvarna/KTM Aluminum Banjo Bolt for Formula
Works Banjo Bolt Formula
Our Price: $21.95
Made from top grade 6AL4V Titanium one of the strongest grades of Ti, these pegs are awesome! Look just like the top championship winning mini and pro riders with Nihilo's new ribbed and reinforced seat covers. Husky/KTM Aluminum Banjo Bolts give you that factory drilled look while cutting off some added weight.